- Bearing Industrial (Group) Limited
- AST Bearings CYSD Bearings FAG Bearings
Home>Products>ISO Bearings>70 mm x 150 mm x 51 mm 70 mm x 150 mm x 51 mm ISO 2314 ISO Bearings
English
70 mm x 150 mm x 51 mm 70 mm x 150 mm x 51 mm ISO 2314 ISO Bearings
ISO 2314 ISO Bearings Needs Analysis , ISO Bearings Manufacturing Service . Get Standard Clearance: Your 6000 Speed Rating (r/min): Free.
- ISO
2314
- 6000
- Open Type
- Standard
- 215mm
- 5.36 KGS
- 173.5
- 120mm
- In Stock
-
Bearing Industrial (Group) Limited2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
70 mm x 150 mm x 51 mm 70 mm x 150 mm x 51 mm ISO 2314 ISO BearingsSpecifications
| Speed Rating (r/min):: | 6000 | Seals or Shields:: | Open Type | Clearance:: | Standard |
| Outside Diameter (mm):: | 215mm | Weight:: | 5.36 KGS | Dynamic Load Rating (kN):: | 173.5 |
| Inside Diameter (mm):: | 120mm | Availability:: | In Stock | Cage Type:: | Plastic |
| Width (mm):: | 40mm | Size (mm): | 70 mm x 150 mm x 51 mm |
70 mm x 150 mm x 51 mm 70 mm x 150 mm x 51 mm ISO 2314 ISO BearingsDimensions
| Place of Origin | Henan, China, Luoyang, China | Type | enclosed | Material | 50Mn/42CrMo |
| Certificate | ISO9001 | Gear Options | Non-gear, internal gear, external gear | Type of tooth | Helical tooth |
| Painted | Available | Weight | 21KG | Gear ratio | 73:1 |
| finish/coating: | Powder Coated |
| seal type: | Contact Seal |
| expansion type: | Non-Expansion Bearin |
| locking device: | Set Screw |
| length through bore: | 55/64 in |
| housing material: | Cast Iron |
| duty type: | Standard Duty |
| overall length/diameter: | 4.3750 in |
| series: | 200 |
| lubrication type: | Lubrication Fitting |
Searches related toISO 2314 ISO Bearings Online Free check
| 70 mm x 150 mm x 51 mm 70 mm x 150 mm x 51 mm ISO 2314 ISO Bearings Cross Reference | ||||||||
| C | D | B | d | e | C0 | d1 | D1 | |
| 2314 | - | 150 mm | 51 mm | 70 mm | - | - | - | - |
| 2314 | 51 mm | 150 mm | 51 mm | 70 mm | - | - | - | - |
| 2314 | 51 mm | 150 mm | 51 mm | 70 mm | - | - | - | - |
| 2314 | 107 kN | 150 mm | 51 mm | 70 mm | - | 37,5 kN | - | - |
| 2314 | 112 kN | 150 mm | 51 mm | 70 mm | - | 37,3 kN | - | - |
| 2314 | 51,000 mm | 150,000 mm | 51,000 mm | 70,000 mm | 0.38 | - | 91.8 mm | 126.6 mm |
| 2314 | - | 150 | - | 70 | - | - | - | - |
| 2314 | - | - | - | - | - | - | - | - |
| 2314 | - | 5.906 Inch | 150 Millimeter | - | 2.756 Inch | 70 Millimeter | - | - | - | - |
| 2314 | - | 150 mm | 51 mm | 70 mm | - | - | - | - |
ISO 2314 - SiS
INTERNATIONAL. STANDARD. ISO. 2314. Third edition. 2009-12-15. Gas turbines — Acceptance tests. Turbines à gaz — Essais de réception. This preview is
Gas turbines - Acceptance tests - SAI Global
May 1, 1989 - International Standard ISO 2314 was prepared by Technical Committee ISO/TC 192,. Gas turbines,. This second edition cancels and replaces the
ISO 2314:2009(en), Gas turbines — Acceptance tests
1:1997 and the Technical Corrigendum ISO 2314:1989/Cor.1:1997. Introduction. This International Standard specifies guidelines and procedures for preparing,
ISO 2314
INTERNATIONAL. STANDARD. ISO. 2314. Third edition. 2009-12-15. Gas turbines — Acceptance tests ... ISO's member body in the country of the requester
GSO ISO 2314:2015 - Standards Store - GCC Standardization
General Information. Mode of Implementation. Standard. Type. Adopt / Endorsement. Adopted Standard. ISO 2314:2009. Status. ACTIVE. Date of publication
ISO 2314:2009 - Gas turbines — Acceptance tests - ISO
This International Standard applies to open-cycle gas-turbine power plants using combustion systems supplied with gaseous and/or liquid fuels as well as
ISO 2314:2009 - Standard Norge
Status: Check Gyldig. Norsk tittel: Gas turbines — Acceptance tests. Engelsk tittel: Gas turbines — Acceptance tests. Varetype: Standard. Språk: Engelsk. Utgave
ISO 2314
ISO 2314 was prepared by Technical Committee ISO/TC 192, Gas turbines. This third edition cancels and replaces the second edition (ISO 2314:1989), which
BS ISO 2314:2009 - Techstreet
BS ISO 2314:2009. Gas turbines. Acceptance tests. standard by British Standard / International Organization for Standardization, 01/31/2010. View all product
Contact Us
- Bearing Industrial (Group) Limited
- Address712 North Bower Road, Macomb, IL 61455-251 U.S.A.
- Phone(Working Time)1-851-780-4545
- Fax
Related News
| skf corvette racing hubs catalog |
| what is skf cross roller bearing |
| skf bearing select size pdf file |
ISO HK3816 ISO Bearings
560 mm x 750 mm x 112 mm 560 mm x 750 mm x 112 mm ISO NP29/560 ISO Bearings
260 mm x 400 mm x 104 mm 260 mm x 400 mm x 104 mm ISO NJ3052 ISO Bearings
90 mm x 160 mm x 40 mm 90 mm x 160 mm x 40 mm ISO NCF2218 V ISO Bearings
ISO HK4524 ISO Bearings